Medium-phosphorus nickel plating (NiP 5-9%)

Of all of these, this is the most used plating.  Its MAIN CHARACTERISTICS are:

  • Uniformity.
  •  Rugosity: Does not vary in low and medium thicknesses.
  • Appearance: Very bright.
  • Hardness:

    – Just plated: 550-650 Hv.

    – With hardness treatment: 950-1000 Hv.

  • Anti-corrosion level: Medium.

    Neutral Salt Spray (ASTM B-117) (depending on the material and layer thickness) < 100 hours.

  • Maximum recommended layer thickness: 100-125 microns.
  • Wear resistance: Very good.
  • Slightly magnetic.

Niquel de medio contenido en fósforo

If you have any questions about the characteristics of Electroless Nickel see our downloads section for more information.

Downloads

Characteristics electroless nickel
Low phosphorus Ni
High phosphorus Ni
Nickel teflon